8.9. Rear-view mirrors

Removal and installation of an internal rear-view mirror

Fig. 8.30. The rear-view mirror is internal: 1 – plate of fastening of a mirror; 2 – screw; 3 – mirror arm; 4 – mirror


1. Turn out the lock screw 2 (fig. 8.30) established in a carving opening in the lower part of the basis of an arm 3 mirrors.
2. The movement remove an arm with a mirror 4 of a step groove of the plate of 1 fastening pasted to a windshield up.
3. Establish a mirror upside-down.

Removal and installation of external rear-view mirrors

Fig. 8.31. The rear-view mirror is external: 1 – mirror; 2 – mirror basis; 3 – the ring is sealing; 4 – the bolt self-cutting; 5 – washer; 6 – percussion cap; 7 – angular slip; 8 – drive lever; 9 – screw; 10 – handle


1. Turn out the screw 9 (fig. 8.31) of fastening of the handle 10 of management on the shlitsevy end of the lever 8 of a mirror.
2. Remove the handle.
3. Turn on 90 ° the percussion cap 6 located in the top part of an internal angular slip 7 take out it and the movement of the top corner of a slip in salon remove a slip up.
4. Turn out three self-cutting bolts 4 with washers 5 and remove a mirror 1.
5. Establish a mirror upside-down